Tips for Installing a Wooden Fence Post

If you’re preparing to install a brand-new wood fence on your property, you should make sure to do your research about how to get the job done properly so it will last long into the future. There are a wide variety of considerations to take into account here, ranging from the kind of wood you should select to how to install a wooden fence post in Utah.

Here are just a few factors to consider that will be of use to you when you begin installing your fence and fence posts:

• The lifespan of your chosen wood: One of the most important factors in a long-lasting fence is the type of wood you select. Cedar, pine and spruce are far and away the most common types of woods used for fences. However, spruce will only last an average of four to seven years, and pine about five to 12 years. Cedar is the longest-lasting of these three common woods, as it has a natural resistance to rot. It will last anywhere from 15 to 30 years, depending on the species.
• The lifespan of treated wood: If you treat the wood you’ll be using, then you’ll get some longer-lasting usage. When treated, you’ll have lumber that will likely last you more than 20 years. Treated cedar might last up to 40 years. So, while there will be a higher price tag associated with the use of treated lumber, it’s worth it in the long run to not have to keep replacing your fence over and over again.
• Avoiding moisture: One of the biggest reasons why fences fail to meet their ideal lifespan is exposure to moisture. While all fences are going to be exposed to the elements like rain and snow, you can at least do your best to avoid fence panels and pickets touching the ground. The posts are also important to consider here. All posts should be treated before they’re installed, and they should have a concrete or gravel filler in the post holes to prevent moisture from becoming an issue.
• Maintenance: After you’ve installed your fence and fence posts, it’s important to keep up with regular maintenance to extend the life of the fence and the wood as much as possible. A failure to do so will result in years being taken off your fence’s life. You should stain and paint your fence, and when those finishes start to wear off, you should make sure to reapply them. A good general rule is to re-stain every two years and repaint every four years, but you can adjust as needed based on the degradation of your fence’s finish. In addition, it can be beneficial to keep the fence clean. Spray off dirt and debris, which can hold moisture and result in rot setting in.

These are just a few tips for you to keep in mind as you prepare to install wooden fence posts in Utah. For more information about how to get the longest life out of your new fence, contact Huberwoods today.

Categorised in: Wooden Fence Posts

This post was written by Writer